久冉科技

业界

通达信红绿波段主图,垃圾分类受益股300779

时间:2021-07-17 02:20 阅读:

  1:通达信波段高低点显示公式,将历史的每个波段的高低点都在主图上显示。最好能加上每个波段的振幅提示。

  你要先明确你的历史波段的高低点是以什么确定的,是跌涨幅大于百分之多少才定通义为顶点或谷点。以下是我给你写的公式,其中的N按你的想法来换数字,比如你的想法是涨跌超过10%才能算谷点或顶点,你就把N改为10。另外,判断顶点或谷点是后知后觉的,比如你看今天是最高了,但明天如果收盘更高,那今天的这个位置就不能算顶点,顶点要向后移了。因此,这个公式只能做参考,切莫以这个公式做选股用。以下的公式你先试试,应该没有问题。
折线,N);
前波峰值:=PEAK(3,N,1);
前波谷值:=TROUGH(3,N,1);
DRAWNUMBER(折线>REF(折线) AND REF(折线)<REF(折线),-(前波峰值-REF(C,1))/前波峰值*100);
DRAWNUMBER(折线<REF(折线) AND REF(折线)>REF(折线)-前波谷值)/前波谷值*100);

  2:

  AA:PEAK(1,8,1),AA:PEAK(1,8,1),COLORGREEN;
这个可以标注压力,我认为如果你为了直观看图,只需要这个,均线多空排列要这儿没有意义!

  3:通达信软件里MACD金叉死叉用红色和绿色小箭头表示的公式

  这些没有用的,别在这上面害自已了。多看经典书,长线投资才是正道 。我研究了十年图表技术分析,什么时间机构进出都能从图上看出来,可是一点用都没有,还使自已亏钱。做股东,面向企业的投资才是正道 。

  4:

  JRH:=HHV(C,2);
JRL:=LLV(C,2);
MA3:=MA(CLOSE,3);
YTSL:=(3*CLOSE+LOW+OPEN+HIGH)/6;
VAR1:=(CLOSE>REF(CLOSE,1) AND CLOSE>REF(CLOSE,2));
VAR2:=(REF(VAR1,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR3:=(REF(VAR2,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR4:=(REF(VAR3,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR5:=(REF(VAR4,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR6:=(REF(VAR5,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR7:=(REF(VAR6,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR8:=(REF(VAR7,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR9:=(REF(VAR8,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VARA:=(REF(VAR9,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VARB:=(REF(VARA,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VARC:=(REF(VARB,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VARD:=(CLOSE<REF(CLOSE,1) AND CLOSE<REF(CLOSE,2));
VARE:=(REF(VARD,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VARF:=(REF(VARE,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR10:=(REF(VARF,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR11:=(REF(VAR10,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR12:=(REF(VAR11,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR13:=(REF(VAR12,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR14:=(REF(VAR13,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR15:=(REF(VAR14,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR16:=(REF(VAR15,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR17:=(REF(VAR16,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR18:=(REF(VAR17,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR19:=((REF(VARD OR VARE OR VARF OR VAR10 OR VAR11 OR VAR12 OR VAR13 OR VAR14 OR VAR15 OR VAR16 OR VAR17 OR VAR18,1)) AND VAR1);
VAR1A:=((REF(VAR1 OR VAR2 OR VAR3 OR VAR4 OR VAR5 OR VAR6 OR VAR7 OR VAR8 OR VAR9 OR VARA OR VARB OR VARC,1)) AND VARD);
红色持股:VAR1 OR VAR2 OR VAR3 OR VAR4 OR VAR5 OR VAR6 OR VAR7 OR VAR8 OR VAR9 OR VARA OR VARB OR VARC,COLOR0000FF,NODRAW;
离场:=IF(红色持股,JRL,DRAWNULL);
明离场价:=离场,COLORFF99FF,NODRAW;
今离场价:REF(离场,1)COLOR0000FF,NODRAW;
青色观望:VARD OR VARE OR VARF OR VAR10 OR VAR11 OR VAR12 OR VAR13 OR VAR14 OR VAR15 OR VAR16 OR VAR17 OR VAR18,COLORFFFF00,NODRAW;
进:=IF(青色观望,JRH,DRAWNULL);
明进场价:=进,COLOR33AACC,NODRAW;
今进场价:REF(明进场价,1),COLORFF0000,NODRAW;
短买:VAR19,COLOR33AACC,NODRAW;
品红离场:VAR1A,COLORFF99FF,NODRAW;
急速超跌:(CLOSE-MA(CLOSE,34))/MA(CLOSE,34)*100<-14,COLORFFFFFF,NODRAW;
上市日期年:REF(YEAR,BARSCOUNT(CLOSE)-1),NODRAW,COLOR0000FF;
月:REF(MONTH,BARSCOUNT(CLOSE)-1),NODRAW,COLORFF00FF;
日:REF(DAY,BARSCOUNT(CLOSE)-1),NODRAW,COLOR00FFFF;
辰星线)+15*REF(YTSL,5)+14*REF(YTSL,6)+13*REF(YTSL,7)+12*REF(YTSL,8)+11*REF(YTSL,9)+10*REF(YTSL,10)+9*REF(YTSL,11)+8*REF(YTSL,12)+7*REF(YTSL,13)+6*REF(YTSL,14)+5*REF(YTSL,15)+4*REF(YTSL,16)+3*REF(YTSL,17)+2*REF(YTSL,18)+REF(YTSL,20))/211,COLOR0000FF;
牵牛线FF;
等待:=IF(MA3>辰星线);
IF(等待>REF(等待,1),等待,DRAWNULL),LINETHICK2,COLOR00FFFF;
IF(辰星线>REF(辰星线),辰星线,DRAWNULL),LINETHICK2,COLOR0000FF;
IF(辰星线<REF(辰星线),辰星线,DRAWNULL),COLOR00FF00;
IF(牵牛线>REF(牵牛线),牵牛线,DRAWNULL),LINETHICK1,COLORFF00FF;
IF(牵牛线<REF(牵牛线),牵牛线,DRAWNULL),COLOR669933;
DRAWTEXT(短买,REF(CLOSE,1),←短买),COLOR33FFCC;
DRAWTEXT(品红离场,REF(CLOSE,1)+0.1,←离场),COLORFF99FF;

  5:怎么查看以前带红绿柱的大盘分时图 通达信只有当天的才有红绿柱

  【以前带红绿柱的大盘分时图】,恩,明白。
那是设置的问题。
摁CTRL+D→设置4→右面第三个选项打钩
然后想看以前某一日的分时图,点那一日的一下,回车。就这样。

  6:通达信软件唐能通l暖气带红绿颜色怎么实现

  公式编程